C558 - Rotating Scope Insertion Tube wash cart
The Steelco Patented rotating wash cart for flexible endoscopes has been developed for ergonomic general operation and also for use in areas with restricted space.
The rotation of the cart allows the operators to position the wash cart in and 360° alignment to better thread the endoscope into the insertion tube at a position and angle which is comfortable for them making the connection of the channels much easier.
A one way locking device aligns the cart for a proper working position and prevents movement during the wash cycle
The double scope insertion tubes ensure the safe storage of the instrument during the process and a complete disinfection / sterilisation of the external surface of the endoscope.
Each insertion tube contains a perforated inner tube which is held away from the outer tube at various points along its length. This Dual tube system with additional components prevent a “water slide” where the water just runs down the bottom of the outer tube.
The patented Steelco system creates a vortex action in the water channel into each insertion tube which swirls around the external surfaces of the endoscope, lifting it off even the perforated inner tube ensuring that no shadowing occurs at any point on the surface of the endoscope.
C559 - Two Level wash cart
Steelco has manufactured a 2 level basket that allows the simultaneous treatment of 2 flexible endoscopes which can also be easily used in areas with restricted space.
The removable trays can be used for the no-contact transportation of the endoscope to both the Steelco ED 100/200 cabinets and other manufactures cabinets for drying and storage.
The accessory C565 prevents the endoscope overlapping at any point / shadowing and positions the connection tube and the distal tube in a constant slope to facilitate the natural drain of fluids from the channels.
C559 - TOE / TEE wash cart
Steelco utilises it 2 level basket to allow simultaneous treatment of 2 TOE / TEE endoscopes with the use of 2 Steelco SAFE CASE's.
With the Steelco SAFE CASE the electronic control and connection cable are placed inside a hermetic sealed case and isolated from the distal tube that requires a complete washing cycle and a high level non thermal disinfection.
The whole package can be placed inside any endoscope washer disinfector where an automatic, compliant and validated reprocessing cycle can be executed.
This is to be used with a 2 level cart such as the Steelco C559 to allow the simultaneous treatment of 2 transesophageal probes.
C560 - Video bronchoscope / fibrobronchoscope wash cart
This wash cart is for the simultaneous treatment of: 4 videobronchoscopes / cystoscopes or 8 fiberscopes / cystoscopes with separate control.
This innovative system allows fantastic money saving though the processing of a greater number of scopes per cycle, but still in the greatest safety.
C563 – Rigid Endoscope wash cart
This wash cart is for the disinfection of up to nr. 20 rigid scopes with luer lock connection for washing.
In accordance to the UNI 15883/1 guideline and in line with greener approach through the reduced use of chemicals to disinfect scopes, Steelco recommends to utilise a thermo-disinfection process for all reusable medical devices that can be high temperature treated.
The Steelco EW2 endoscope reprocessor is equipped to run a standard thermal disinfection cleaning program.
C568 - Endoscope Storage Cassette wash cart
This wash cart is used to decontaminate nr. 2 endoscope storage cassettes as utilised by the Steelco Transport Trolley and the Steelco Drying / Storage cabinets